Airtight Plastic Access Panels

• Purpose made product saves time and money compared with traditional joiner–made or steel access doors
• Unique airtight seal design reduces the air permeability to 0.00/h.m at +50pa
• Flush fitting door panels that can be fully removed for maximum access
• Excellent aesthetic appearance and finish
• Textured finish allows painting if required
• Visible picture frame surround smartly conceals cut out edges and contributes to a faster installation
• Universal door handing
• Installed in minutes using basic hand tools and silicone or flexible sealant
• Clip fit door panels with catch clip closing mechanism
• Acoustic performance of 31dB

• Manufactured to BS EN ISO 9001 and BS EN ISO 14001
• Helping to meet Building Regulation:
  • Document Part J – Concealed Flues in Voids (2010 edition)
  • Document Part E – Resistant to Sound (2003 edition)
  • Part L1 and L2 – Conservation of Fuel and Power (2013 edition)

• Tough and UV stabilised injection moulded HIPS plastic.
• White finish.

• Clean using a soft cloth with a mild detergent.

L20 Doors/Shutters/Hatches

Clause 360^ HATCHES

• Manufacturer: Timloc Building Products, Timloc House, Ozone Park, Howden, East Yorkshire, DN14 7SD. T: 01405 765567 W: www.timloc.co.uk
• Type: Airtight access panels
• Product code: AP300AT (see other product codes/variations of sizes)
• Frame fitting size: 305 x 305mm
• Application: Wall, ceiling, cupboard or voids
• Frame type: Picture
• Colour: Textured white HIPS plastic

• Cut hole to size (see frame fitting size), making sure that it is straight and level.
• Apply silicone or other suitable grade building adhesive to the back of the frame.
• Press the frame firmly into place, checking it is straight and level.
• Do not operate until the adhesive has set completely.
• Simply push the clip fit door panel into the frame.

• State which size of panel is required and confirm the hole cutting size.